|
Dog safety equipmentWe have dog safety products at great prices. Whether you are searching for dog safety supply or dog pet safety, you have come to the right place. Click on any link to find more information on all of our safety products.
 Super Bright, Long Lasting LED Lights. Keep your dog safe at night. This innovative collar uses long-lastign LED lighting to flash a warning to passing motorists, bicycly riders and other animals.
When you walk your pet at night, you will have peace of mind with our flashing safety collar. Tough, Double Latching clasp and Stainless Steel D-Ring.
Water resistant, Durable & Comfortable Nylon Collar, Flashes Bright LED Red, White & Blue Lights. Visible up to 1/2 mile away.
Collars and Leash are 1 inch wide.
$18.99
(More Info) |
|
Pet Blinkers give you the added security and peace of mind knowing you and your pet(s) are visible at night.
Whether youre going for a jog with your pet or if you just want extra attention, attach the Pet Blinker to your pets collar and be seen a half-mile away!
These eye-catching, multi-color LEDs accessorize any pet!
Requires three AG3 lithium cell batteries (included). Available in both Small (dogs under 15 lb) and Large (dogs over 15 lb) sizes to fit any pet. Each size is availble with your choice of the following colored LED lights
$9.99
(More Info) |
|
| |
 Chillybuddy working incredibly well with Bailey. On the boat--yesterday w/out it he was miserable. Not even panting today!!" Dave W., Annapolis, MD "Chilybuddy is definitely a miracle--it worked so well on Kiki! The ChillyBuddy had immediate impact on the temperature of my dog's coat. I could not believe how long she will stay outside in the sun and enjoy it." Charlie G., Annapolis, MD "My little girl, who usually HATES more than a few seconds in the heat of mid-day, was actually running happily in an open field with her Chillybuddy jacket on!" Jill S., Rockville, MD "Really cool product (pun entirely intended!). The dog loves it and is now really enjoying her afternoon walks instead of laying down in protest halfway through.Thanks for a remarkable product. I've already recommended it to all the neighbors. Bella is a great spokesdog for the product, especially with that stunning silver color on her black coat." Nancy B., West Boynton Beach, FL |
 Chilly Buddy Sport Jacket Chillybuddy Sport is designed for the dog that plays, runs or works in the woods or any other rough terrain. Its innovative design allows the jacket to stay securely on your dog throughout the most active conditions. This design is only available on the following sizes: Medium, Large, X-Large and XX-Large.
What's Chillybuddy?
Chillybuddy is a light-weight mesh cooling jacket designed specifically to help keep a dog comfortable in hot weather and reduce harm from exposure to the sun.
$54.95
(More Info) |
|
Introducing Chilly Buddy! What is Chillybuddy? Chillybuddy (Patent Pending) is a light-weight mesh cooling jacket designed specifically to help keep a dog comfortable in hot weather and reduce the effect of exposure to the sun. The jacket's outer layer is made of woven synthetic with an aluminized finish. The twisted strands of the fabric function like thousands of tiny mirrors, reflecting all wavelengths of light away from the surface. The jacket is lined with a cotton mesh. Both layers allow air to pass freely through. The cotton mesh liner can be wetted to provide substantial evaporative cooling. Unlike other wet jackets, the evaporation occurs in the shade of the outer layer, creating an unusually cool environment on the hottest days. Facts about Chillybuddy: - Chillybuddy jacket can significantly lower coat temperature and provides a shield from direct sunlight.
- On a 90° F day, wearing a Chillybuddy jacket can lower the coat temperature from 145° F to 103° F, a reduction of almost 30%.
- Soaking the Chillybuddy in water to dampen the cotton lining before use can lower a dogs coat temperature by a further 20 degrees--from 103° F to 83° F. Cotton has been repeatedly shown to be the best fiber to hold water for evaporative cooling. Synthetic wicking fabrics are useless in this application because dogs do not sweat.
- For light-haired dogs, a Chillybuddy jacket also protects the underlying skin from sunburn.
- Chillybuddy can protect coats of show dogs from bleaching by the sun -- which often occurs as summertime reddening or browning, especially at the tips of the coat.
- The Chillybuddy jacket was field-tested in mountain terrain and open-field hunting. It is durable, tear-, snag- and run-resistant under repeated use in rugged outdoor conditions, withstanding thick brush.
 Chilly Buddy Casual Jacket Chillybuddy Casual, the everyday cooling jacket, is designed for the dog who enjoys playing, walking or even running outside in basic conditions. Easy to put on, easy to take off, Chillybuddy Casual will always keep your dog cool on hot days.
What's Chillybuddy?
Chillybuddy is a light-weight mesh cooling jacket designed specifically to help keep a dog comfortable in hot weather and reduce harm from exposure to the sun
$37.95
(More Info) |
 NECK: The circumference of the dogs neck at its widest point. BACK LENGTH: The distance between the collar and the base of the tail. GIRTH: The circumference of the dogs chest at its widest part. It is important to note that the back length is the most important measurement of the three. The Chillybuddy jacket provides room for adjustment in the girth and neck straps so it is crucial that the Chillybuddy you get covers the length of your dog's back. When in doubt, a little excess on the back length is better than having it be too short. |
|
|
 There is no greater tragedy than to lose a beloved family pet in a needless and preventable drowning accident. Every year in the U.S. alone tens of thousands of family pets drown in swimming pools and walled ponds/lakes, along with countless millions of other creatures raccoons, possums, squirrels, frogs, chipmunks, mice, etc. The fact is pools are perilous for our fur kids. |
|
|
|
 Hottydog is proud to offer a solution for not only our precious charges, but for all animals that may inadvertently take a midnight dip into your pool or pond. It's durable, easy to install, and effective! THE PROBLEM: When a pet or other animal jumps or falls in a pool, walled lake or pond, even a water trough, they can swim for a while (some more and better than others) but, without a way out, they can eventually drown from exhaustion brought on by panic or fatigue. The fact is, pools are perilous for pets and no pool owner wants anything to drown in their pool, whether it is a critter or, more especially, a pet that is considered an important part of a family! Though some drownings occur by day, they occur most often at night leaving the pool owner or lakefront resident with that cruel surprise of a dead pet or animal floating in their pool or pond. If a pool fence or door is left open, if there is no protective fence or cover, or if no one is around to hear an alarm when an animal gets in, what then? No matter how careful you are, there is always the possibility that something can happen. In the case of vinyl-lined pools, what could be more expensive than replacement or repair that is not covered by insurance but was caused by a frantic animal trying to escape water entrapment! What saves the day? Leaving a Skamper-Ramp installed to make sure no critter is trapped and punctures your liner. SOLUTION: Hottydog is a proud supplier of the animal water escape device, drowning prevention product known as Skamper-Ramp ® - in two sizes: Original and Skamper-Ramp Big Dog. This patented device (US Patent # 664389, Trademark registration #2867405) is attractive, affordable, lightweight and, most importantly, works--even when no one is there to help! Skamper-Ramp safeguards against finding any dead animals pets or critters in your pool, allowing them to escape drowning by exiting the water on their own, providing peace of mind to pet owners and animal lovers. 100% made in North America with pride! |
|
|
This simple white, box-corrugated, hi-tech plastic ramp attaches to the side of the pool, walled pond, or even most boats and docks. Because all living beings see 550nm (white), animals can see itday or nightand they "skamper" out on the ramp.- Provides animals with a way out of their water entrapment
- Made of strong, lightweight, box-corrugated, ribbed polypropylene plastic
- Skamper-Ramp® provides all animals--dogs, cats, ferrets, as well as "critters"--with way to get out of their water entrapment
- Simply "flip it out" when the pool is in use, and flip it in to safeguard when you leave
- Deck and assembly hardware included
- Made in America with pride!
| - No more morning surprises
- Durable, affordable, attractive
- Easy to assemble and install
- 2 year warranty against product defect
- Safe for pools with vinyl liners
|
| | Scooter Approaches.... | Smaller dogs swim up to Skamper-Ramp prior to climbing out. Small dogs don't have the strength or bulk to pull themselves out of most pools, and even if they did,, it would tear up a liner. | | Climbing Scooter on ག version of ramp | After reaching the ramp, smaller pets and animals can easily "skamper" out of the water. |
| A Safe Poolside Scooter
Size
Small Skamper-Ramp size , assembled - 25 x 13 x 5
Attachment
We suggest attaching the ramp to the pools deck with the stainless steel D-ring-clips and rope provided. The ramps have a knot tied as close to the ramp surface as possible in order for it to maintain its orientation. There are two sets of holes in the ramp for threading the rope through, in order to have a snug fit to the wall (including under a deep coping, such as with a steel sided vinyl wall.) Some people choose to use existing railings, pool cover anchors, or water leveler covers, rather than drilling into their deck. In this case, be sure the rope tie-downs are not spread much farther apart than the width of the ramp for optimal performance. The ramp should float/hang in the water at an angle that is approximately 30-degrees below horizontal so that the ramps round nose is submerged by a few inches. Lead-plug or stainless steel anchors with non-rusting screws are suggested for poured/solid decks; non-rusting bolts and nuts with a lock washer are suggested for hollow decks. Customers should check with their pool service company if they are unsure what method to use! Directions are provided with every Skamper-Ramp. Vinyl Liner Pools
Skamper-Ramps are designed to keep an animals claws from slashing the plastic walls of vinyl liner pools as they attempt escape. Each corner radius is designed to protect--not puncture--the vinyl liner. For extra buoyancy we suggest using flotation noodle sections attached with plastic tie-downs. While we haven't had anyone report a problem but we understand and respect the fear of replacing a liner. In order to minimize rub, if you have it or can get it, we suggest doubling the vinyl wall layer in the area where the ramp will be installed. If that is not possible you could tape the edge of the ramp that will be closest to the pool wall with duct tape or waterproof vinyl pool tape. We are in the process of developing a vinyl pool kit for this. In the case of thick coping/a deep overhanging deck, be sure to rethread the rope through the holes below the logo, in order to pull the ramp snugly under the overhang, and close to the pool wall. Attachment
We suggest attaching the ramp to the pools deck with the stainless steel D-ring-clips and rope provided. The ramps have a knot tied as close to the ramp surface as possible in order for it to maintain its orientation. There are two sets of holes in the ramp for threading the rope through, in order to have a snug fit to the wall (including under a deep coping, such as with a steel sided vinyl wall.) Some people choose to use existing railings, pool cover anchors, or water leveler covers, rather than drilling into their deck. In this case, be sure the rope tie-downs are not spread much farther apart than the width of the ramp for optimal performance. The ramp should float/hang in the water at an angle that is approximately 30-degrees below horizontal so that the ramps round nose is submerged by a few inches. Lead-plug or stainless steel anchors with non-rusting screws are suggested for poured/solid decks; non-rusting bolts and nuts with a lock washer are suggested for hollow decks. Customers should check with their pool service company if they are unsure what method to use! Directions are provided with every Skamper-Ramp. Vinyl Liner Pools
Skamper-Ramps are designed to keep an animals claws from slashing the plastic walls of vinyl liner pools as they attempt escape. Each corner radius is designed to protect--not puncture--the vinyl liner. For extra buoyancy we suggest using flotation noodle sections attached with plastic tie-downs. While we haven't had anyone report a problem but we understand and respect the fear of replacing a liner. In order to minimize rub, if you have it or can get it, we suggest doubling the vinyl wall layer in the area where the ramp will be installed. If that is not possible you could tape the edge of the ramp that will be closest to the pool wall with duct tape or waterproof vinyl pool tape. We are in the process of developing a vinyl pool kit for this. In the case of thick coping/a deep overhanging deck, be sure to rethread the rope through the holes below the logo, in order to pull the ramp snugly under the overhang, and close to the pool wall. |
Shipping via UPS Ground is included in the Skamper Ramp price. |
$59.99
(More Info) |
Use the Large Size Skamper Ramp for dogs over 45 lbs and for installation on docks or boats. |
| | | | |
|
|
